30mm Breeze Bending Machines



Specification

High Torque Version Available On Request	For high speed manufacture of wheel barrows or seat frames where symmetrical shapes are required. Machines can be fitted with weld seam detection units, end formers, tube marking equipment, bar code tube batch readers etc. The automatic unloading can use stacking equipment or robots for a second operation such as punching or welding.
Maximum tube size mild steel: 38mm dia x 1.5mm wall at 2x diam CLR Maximum tube bend angle 190 Deg Typical power consumption: 3 phase 380/415v. 33Amp peak on 48mm x 2mm wall stainless steel 90 deg bend 2.5amp per phase between bends Noise level: 55 to 60db (voice level) PC Based Control System Using Windows XP Modem Off Site Diagnostics

38mm Twin Head Machine

High Torque Version Available On Request

For high speed manufacture of wheel barrows or seat frames where symmetrical shapes are required. Machines can be fitted with weld seam detection units, end formers, tube marking equipment, bar code tube batch readers etc. The automatic unloading can use stacking equipment or robots for a second operation such as punching or welding.

Maximum tube size mild steel: 38mm dia x 1.5mm wall at 2x diam CLR
Maximum tube bend angle 190 Deg
Typical power consumption: 3 phase 380/415v. 33Amp peak on 48mm x 2mm wall stainless steel 90 deg bend 2.5amp per phase between bends
Noise level: 55 to 60db (voice level)
PC Based Control System Using Windows XP
Modem Off Site Diagnostics

Specification

High Torque Version Available On Request