Bend Dies, Clamp Dies and Compounds
The Bend Die is used to form the tube to the desired radius. The Clamp Die holds the tube securly to the Bend Die so that the tube does not slip during bending.
OMNI-X
_01.jpg){kind=small}
_02.jpg){kind=small}
_03.jpg){kind=small}
_04.jpg){kind=small}
_05.jpg){kind=small}
_06.jpg){kind=small}
_07.jpg){kind=small}
_08.jpg){kind=small}
_09.jpg){kind=small}
_10.jpg){kind=small}
